Buying a used Allen & Heath Xone:92
Four music channels, two mic/return channels and a pair of analogue filters you can really play. Here's how to check a used Xone:92, original or Mk2, before you take it home.
At a glance
- Type
- Analogue DJ mixer
- Channels
- 4 stereo music channels (phono/line) + 2 mic/return channels
- Filters
- Two stereo analogue filters (high-pass, band-pass, low-pass), one each side of the crossfader
- Effects loops
- Two aux sends with stereo returns
- MIDI
- MIDI out (5-pin DIN)
- Headphones
- 6.3 mm and 3.5 mm jacks
- Power supply
- Internal, mains lead (IEC)
- Weight
- 6 kg (original), 7 kg (Mk2)
What to check before you pay
- Original or Mk2. Check the model name on the mixer and its rear label first. The two versions use different crossfaders, which matters for spare parts and for what you should pay.
- Crossfader. Move the crossfader slowly from end to end with music playing. Listen for crackle, dead spots or sound leaking through at either end. On both versions the crossfader is designed to be replaceable, so a tired one isn't a deal-breaker, but price it in.
- Channel faders and knobs. Work every channel fader and turn every EQ, gain and filter knob through its range. On an analogue mixer, worn controls give themselves away as crackle or a channel dropping in and out.
- Filters. Switch on each filter, sweep the frequency and resonance, and try the different filter modes. Both filters should sound and behave the same. They're a big reason to buy this mixer, so give them a proper workout.
- Every input and output. Test the phono and line input on each channel you'll use, the mic channels if you need them, and the main, booth and headphone outputs.
- Mains lead and power. The power supply is built in. Check the mixer powers up reliably every time, and ask whether the mains lead is included.
A mixer you play, not just plug in
The Xone:92 is an analogue mixer with four stereo music channels, each taking phono or line, plus two mic/return channels. What sets it apart is the pair of stereo analogue filters, one on each side of the crossfader, with high-pass, band-pass and low-pass modes. Add two aux sends with stereo returns for outboard effects and a MIDI out, and you have a mixer that rewards hands-on, expressive mixing.
Original or Mk2?
Both versions share that same layout: four music channels, two mic/return channels and the two filters. The clearest difference for a buyer is the crossfader. The original uses a Penny & Giles VCA fader; the Mk2 comes with a Mini innoFADER Pro fitted as standard. Both are designed to be replaceable. Check which version you’re being offered and price it accordingly.
Why the filters deserve your time
If you’re buying a Xone:92, the filters are probably part of the reason. Spend a few minutes sweeping them on both sides of the crossfader during your test. A scratchy EQ knob is an annoyance; a misbehaving filter takes away a large part of what makes the mixer special.
What to ask the seller
- Is it the original or the Mk2?
- Has the crossfader or any fader been replaced?
- Is the mains lead included?
Which version is it?
| Model | Key difference |
|---|---|
| Xone:92 (original) | Penny & Giles VCA crossfader, removable for replacement; 6 kg |
| Xone:92 Mk2 | Mini innoFADER Pro crossfader fitted as standard, user-replaceable; 7 kg |
Compare
Related guides
Manuals
- Owner's manual Allen & Heath XONE:92 User Guide (original, AP5345 Issue 4)
- Owner's manual Allen & Heath XONE:92 Mk2 User Guide (Issue 1)
Links open external manual archives or the manufacturer's site. We don't host these files.
Sources
- Allen & Heath XONE:92 User Guide, AP5345 Issue 4, 2005 (original model)
- Allen & Heath XONE:92 Mk2 User Guide, Issue 1, 2024